Chiller Water Hydronic BLDC Fan Coil For Hotel Villa Use
1. Super thin exposed DC fan coil unit main characteristics
(1)Adopt famous branded high quality BLDC motor,high efficiency and low energy consumption;DC motor energy consumption is average less than 60% of AC motor.
(2)With long running life: as common AC motor is low operating efficiency,usually only 40~45% power consumption turn into kinetic energy,that means balance 55~60% energy is converted into heat,this heat may cause aging to motor components,which is harm to the motor life.DC brushless motor efficiency is always more than 80~95%,so only little energy changes to heat to prevent motor aging.
(3)Fast cooling/heating,temperature fluctuation is small,more comfortable.
a. If temperature difference between room temperature and setting temperature is big:
for normal AC style FCU,the fan will run under the setting speed;while the DC style will automatically run at high speed to make the room temperature to the setting temperature.
b. When the room temperature reach the setting temperature,the AC style fan coil will stop the fan running or close the water valve,this will cause the cooling/heating can not continue and there is temperature shock in the room;while the DC style fan coil will change its running speed according to the temperature difference between room temperature and setting temperature:if the distance is big, the fan speed will be higher,and if the distance is smaller ,the fan speed will be lower.
2. Ultra thin exposed floor standing fan coil unit main components
| Fan |
Cross-flowl type, pass statically and dynamically balanced test |
| Motor |
Plastic sealed single-phase motors are suitable for different voltages |
| Drain pan |
Condensate water drained out by the condensate pipe |
| Coil |
Hydrophilic blue aluminium fin around with copper tube |
| Housing |
Galvanized steel structure, aluminum alloy air grille |
| Controller |
Built-in LED thermostat optional |
3. Ultra thin exposed floor standing fan coil brief introduction
| Type |
DC motor floor standing slim exposed fan coil |
| Max air flow |
200~600CMH(EST200UT2~600UT2) |
| Min air flow |
80~240CMH |
| Cooling capacity |
1.015~3.615KW |
| Heating capacity |
1.615~5.715KW |
| Fan type |
Cross-flow |
| Motor |
DC plastic seal motor |
| Application |
Commercial buildings,Hotel, Villa, etc. |
(1)Showroom
(2) Shopping mall
(3) Restaurant & Bar
(4) Hotels
(5) Offices
(6) Building
(7) Clean room
(8) Other fields
4. Slim exposed floor standing wall mounted fan coil construction features
5. Eurostars Fan coil unit series
| 1 |
Ceiling concealed fan coil unit |
| 2 |
High ESP ducted fan coil unit |
| 3 |
Universal concealed fan coil unit |
| 4 |
Floor standing exposed fan coil unit |
| 5 |
Ultra thin exposed fan coil unit |
| 6 |
Ceiling exposed fan coil unit |
| 7 |
Ceiling cassette fan coil unit |
| 8 |
Ceiling exposed & floor standing fan coil unit |
| 9 |
Wall mounted fan coil unit |
6. Ultra thin fan coil installtion instruction
7. Our fan coil production line
Every fan coil has strict production process, including assembly, testing, packing.
8. Our warranty, technical support and failure claim procedures
(1) Warranty
a. Eurostars HVAC units delivered to customers are carefully examined and tested, with 48 hours trouble-free trial operation.
b. Eurostars HVAC units enjoy 1~1.5 years guarantee ever since B/L date.
(2)Technical support
a. Eurostars provide full technical support and training courses after equipment installation and commissioning.
b. 7*24 hours phone assistance on technical support.
c. Eurostars provide overseas guide installation,but not for free.
(3)Failure claim procedures
a. Detailed written failure description is required by fax or by mail, indicating the relevant equipment information and detailed description of failure.
b. Relevant pictures are required for failure confirmation.
c. Eurostars engineering and after-sales service team will check and form a diagnosis report.
d. Further trouble-shooting solutions will be offered to customers within 24 hours after receiving the written description and pictures.
9.FAQ
Q: Can your company produce non-standard machine?
A: Sure, our factory has more than 30 years' experience in design and manufacturing chiller, we also supply the machine based on the specification provided by the customers. You just need to give us your detailed requests, we will design and manufacture after communication and confirmation.
Q: Can I have a sample for testing before ordering products?
A: Yes, you can. And you are warmly welcomed to visit our factory before PO.
Q: What is the warranty of products?
A: Warranty: 12~24 months after Bill of Lading date. Any unartificial failure occurred within the period, we'll supply you the spare parts for free, and permanent technical support & consultation all life long for the machines.
Q: How to properly install the fan coil unit?
A: We have very detailed user manual and installation instructions, also can be directly telephone or online video guidance.
10. Our Ccustomer visit
EUROSTARS was established in 2006, has a professional technical team to research and develope HVAC products. We offer OEM/ODM service to our clients.
11. Fan coil unit package and delivery
For bulk order, our standard package is carton packing for fan coil, for safe delivery and easy to load/unload, we will stack several layers together with plastic film and packing straps tightly onto the plywood or plastic pallets.
For sample order, we generally use plywood box or honeycomb cardboard to protect.
12. Fan coil unit projects
We exported fan coils to Serbia, Romania, Greece, France, South Africa, Australia, Uzbekistan, Mexico, Argentina, etc..
Audited Supplier 
){kind=link}